• LCD Color Television 32AV933N Ver. 1.00 Updating history Currently there are no updates available. Please check back at a later time for any future updates.

Toshiba shall not be liable to anybody for any damages, losses, expenses or costs, if any, incurred in connection with or as a result. Copy a Firmware BIN file to USB disk (root directory) with FAT 32. For example the.

>> terms and conditions >> privacy policy TOSHIBA WEB-ZEUS Copyright © 1995-2012 TOSHIBA Corporation, All Rights Reserved. • OR IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Toshiba shall not be liable for any damages, losses, expenses or costs, if any, incurred in connection with or as a result of use of any information or data provided herein. • Increasing attention is given to issues related to the global environmental. Toshiba Corporation recognizes environmental protection as a key management tasks, and is doing its utmost to enhance and improve the quality and scope of its environmental activities. In line with this, Toshiba proactively promotes Green Procurement, and seeks to purchase and use products, parts and materials that have low environmental impacts. • PCBs as the level of heat required to melt lead-free solder is high.

>> terms and conditions >> privacy policy TOSHIBA WEB-ZEUS Copyright © 1995-2012 TOSHIBA Corporation, All Rights Reserved. • Print this page SAFETY INSTRUCTION WARNING: BEFORE SERVICING THIS CHASSIS, READ THE 'SAFETY PRECAUTION' AND 'PRODUCT SAFETY NOTICE' INSTRUCTIONS BELOW. Safety Precaution WARNING: SERVICING SHOULD NOT BE ATTEMPTED BY ANYONE UNFAMILIAR WITH THE NECESSARY PRECAUTIONS ON THIS RECEIVER. THE FOLLOWING ARE THE NECESSARY PRECAUTIONS TO BE OBSERVED BEFORE SERVICING THIS CHASSIS. Parts mounting and routing dressing of wirings should be the same as that used originally. For safety purposes, insulating materials such as isolation tube or tape are sometimes used and printed circuit boards are sometimes mounted floating.

Also make sure that wirings is routed and clamped to avoid parts that generate heat and which use high voltage. • Resistance values in orms ( ). V: Voltmeter or oscilloscope (r.m.s. Or peak reading) Input resistance: Input capacitance: 200 pF Frequency range: 15 Hz to 1 MHz and d.c. Respectively Note: Appropriate measures should be taken to obtain the correct value in case of non sinusoidal waveforms. The measuring instrument is calibrated by comparing the frequency factor of with the solid line in figure F.2 of IEC 60990 at various frequencies. • >> terms and conditions >> privacy policy TOSHIBA WEB-ZEUS Copyright © 1995-2012 TOSHIBA Corporation, All Rights Reserved.

• Before replacing any of these components, read the parts list in this manual carefully. The use of substitute replacement parts which do not have the same safety characteristics as specified in the parts list may create electrical shock, fire, or other hazards. >> terms and conditions >> privacy policy TOSHIBA WEB-ZEUS Copyright © 1995-2012 TOSHIBA Corporation, All Rights Reserved. • Print this page SAFETY INSTRUCTION Handling the LCD Module Safety Precaution In the event that the screen is damaged or the liquid crystal (fluid) leaks, do not breathe in or drink this fluid. Also, never touch this fluid. Such actions could cause toxicity or skin irritation. If this fluid should enter the mouth, rinse the mouth thoroughly with water.

Carefully align the holes at all four corners of the LCD module with the corresponding holes in the LCD cover and fasten with screws. Do not strongly push on the module because any impact can adversely affect the performance. Also use caution when handling the polarized screen because it can easily be damaged.

Glass is used in the panel, so do not drop or strike with hard objects. Such actions can damage the panel. Pro evolution soccer 3 pc ita download free. CMOS-LSI circuitry is used in the LCD module, so avoid damage due to static electricity. When handling the module, use a wrist ground or anchor ground. • liquid crystal due to cold air or loss of resilience or other damage. Do not disassemble the LCD module. Such actions could result in improper operation.

When transporting the LCD module, do not use packing containing epoxy resin (amine) or silicon resin (alcohol or oxim). The gas generated by these materials can cause loss of polarity. • >> terms and conditions >> privacy policy TOSHIBA WEB-ZEUS Copyright © 1995-2012 TOSHIBA Corporation, All Rights Reserved. • PANEL (T-CON) P201 P202 CN12 1 24V 1 12V 1 +12V_NORMAL 1 PANEL_VCC 2 24V 2 12V 2 +12V_NORMAL 2 PANEL_VCC 3 24V 3 12V 3 +12V_NORMAL 3 PANEL_VCC 4 24V 4 GND 4 GND 4 PANEL_VCC 5 24V 5 GND 5 GND 5 OD_OCP_SEL 6 GND. • Print this page TROUBLESHOOTING GUIDE UNDER CONSTRUCTION Note: Please check back in the future. >> terms and conditions >> privacy policy TOSHIBA WEB-ZEUS Copyright © 1995-2012 TOSHIBA Corporation, All Rights Reserved. • During F/W upgrade will display percent on the screen when is finished will shown a message on LCD screen then unplug USB disk.